Cost to Replace Fascias and Soffits With UPVC

Most roofs are fitted with fascia boards, which are the timbers fixed onto the edges of rafters, hiding them from view. Roofs and roof timbers overhang the walls of a house. Soffits are fitted to bridge the gap between the wall and the edge of the roofline.

The area covered by soffits is not exposed to the weather and so wood is often used to make soffits. However, wood will take in some of the moisture in the air, and over time will warp and distort. Replacing timber fascias and soffits with Upvc is a common job for roofers.

For the homeowner, it is an easy way to improve the appearance of the roof edges, while ensuring next to no maintenance will be required for years to come. This article addresses the costs of replacing fascias and soffits with the durable Upvc.

Why replace fascias and soffits?

So why should you replace fascias and soffits? Hopefully it’s not just because someone knocked on your door and made you an offer you simply couldn’t refuse. Unlike soffits which are tucked safely away from the weather, fascias bear the brunt of the rains and snow.

Also, any leaks from your gutters will drip across the fascia boards, making them vulnerable to weather related deterioration. When faced with rotting fascia boards, a homeowner has the following options to make the house look good again:

Cladding the existing fascia boards with UPVC panels – this is the cheapest option but if the fascia boards are falling apart the cladding won’t hold. Cladding could be an option for new timber fascia boards to protect them against wet weather.

The second option is to rip out the weather damaged fascia boards and replace them with new timber fascias. If you love painting and maintaining your fascias then this could be an option for you. Timbers will require preservative treatment before putting up.

The recommended option is to replace wooden fascias with UPVC fascia board because UPVC requires very minimal maintenance and is weatherproof and therefore durable.

Additional complementary work to be done with fascias and soffits replacements

If you are spending money getting your fascias and soffits replaced, you might as well have any complementary work done at the same time. Examples of this work include:

Repair and replacement of guttering.

Installation and repair of rainwater downpipes.

Roof tile repairs and replacements while you have scaffolding for easy roof access.

Minor repairs such as cement pointing or repairs to roof rafters.

Getting quotes for all the extra work you need doing is very important because you will know how much the whole project will cost, and if you have the budget for it.

I have heard about fascia capping is it better than replacing with UPVC fascias?

To reduce the cost of replacing fascias and soffits, some homeowners opt for capping or cladding instead of replacement. This could be a viable option if the fascias and soffits are still in excellent condition and will work to preserve them. However, if the timber is in poor condition and falling apart, we do not recommend capping.

Requesting quotes for both types of work and receiving professional guidance on the best way forward for your particular situation. UPVC capping prices may be lower than replacement but at the end of the day timber will deteriorate faster than UPVC so you may want to consider durability when you make your decision.

Source: householdquotes.co.uk/cost-to-replace-fascias-and-soffits-with-upvc-2